Search for: All records

Defect localization in homogeneous plate structures is relatively easy with various well-established acoustics-based techniques. However, localizing defects in heterogeneous structures can be challenging due to complicated reflection, refraction and scattering patterns arising from heterogeneous boundaries during wave propagations. This work introduces a topological acoustic (TA) sensing technique for localizing defects in heterogeneous plate structures. The geometric phase change – index (GPC-I) derived from TA sensing is used to detect perturbations caused by defects along the sensing paths between transmitters and receivers. The proposed method identifies the largest GPC-I values for various sensing paths. A higher GPC-I value on a sensing path implies a higher probability of having a defect on that path. A maximum peak value dependent threshold in GPC-I plots (GPC-I vs. sensor sites) is defined to identify and filter out those unreliable sensing paths in the proposed localization method. Finite element based numerical analysis in Abaqus/CAE software verifies the effectiveness of the proposed method. The commonly used methods using velocity differences (VD) and amplitude ratios (AR) are also tried out for defect localization for comparison. The performance comparison of the localization results using GPC-I, VD, and AR reveal that the GPC-I based technique is the most effective technique for defect localization. 

he further signal processing for wave signal extraction as in displacement-based detection systems. However, due to both interfering lights coming from sample surface, the collected light in a fiber-optic-based Sagnac interferometer system is very weak when applied to biological tissue, where the refractive index of tissue and air are close. The objective of this paper is to study the feasibility using a compact fiber-optic Sagnac interferometer to detect vibrational waves on a biological tissue surface. An actuator made with a 10mm x 10mm x 3mm piezoelectric chip loaded on a 3D-printed polymer-made prism-shaped wedge (1cm x1cm x1cm) was used for ultrasound surface wave excitation. A bulk copolymer-in-oil phantom (100mm diameter with 27mm height) was used to mimic biological tissues. A compact fiber-optic-based interferometer was used to detect the propagation of surface waves in the tissue mimicking phantom and the wave propagation speeds were determined based on the wave detection. Young’s modulus was calculated based on the measured wave speed on the phantom surface. A tensile testing machine was used to measure the Young’s modulus in a compression mode as a comparison. The results were compared. 

Anisotropic collagen-based biomaterials have gained significant attention in the fields of tissue engineering and regenerative medicine. They have shown great potential for wound dressing, corneal grafting, and exploring the mechanism of cancer cell invasion. Various external physical field-based methods for the fabrication of anisotropic collagen-based biomaterials have been developed, including electrospinning, microfluidic shearing, mechanical loading, and so on. In this study, we put forward an acoustic streaming-based method that uses acoustic wave-induced fluid streaming to control collagen self-assembly and fiber arrangement. Our acoustic device leverages a piezoelectric transducer to generate traveling acoustic waves in fluids, and the wave-fluid interaction further induces fluid streaming, known as acoustic streaming. If the fluid contains collagen macromolecules, the acoustic streaming is able to affect the collagen self-assembly process to create biomaterials containing directionally arranged collagen fibers along the streaming velocity direction. Therefore, this acoustic streaming-based method allows for manufacturing collagen hydrogel layers that contain acoustically arranged collagen fibers and have controlled anisotropic material properties. We performed a series of proof-of-concept experiments by using a fabricated acoustic device to control the self-assembly process of collagens loaded in a Petri dish. Our results show the effectiveness of arranging collagen fibers that follow the flow direction of acoustic streaming. To better understand the collagen manipulation mechanism, we used particle image velocimetry to characterize the acoustic wave-induced fluid streaming. We expect this study can contribute to the fabrication of collagen-based anisotropic biomaterials for biomedical applications. 

A newly developed Nonlinear Ultrasonic (NLU) technique called sideband peak count-index (or SPC-I) measures the degree of nonlinearity in materials by counting the sideband peaks above a moving threshold line – larger the SPC-I value, higher is the material nonlinearity. In various published papers, the SPC-I technique has shown its effectiveness in Structural Health Monitoring (SHM) applications. However, the effects of different types of nonlinear phenomenon on the sideband peak generation is yet to be investigated in depth. This work addresses this knowledge gap and investigates the effects of different types of nonlinearity on the SPC-I technique. Three types of nonlinearities (material nonlinearity, structural nonlinearity and contact nonlinearity) are investigated separately through numerical modeling. Numerical modeling results show that the sideband peak values do not increase proportional to the input signal strength thus indicating nonlinear response, and different types of nonlinearities affect the SPC-I measurements differently. For the experimental verification a composite plate with impact-induced damage is considered for investigating the material nonlinearity and structural nonlinearity while a linear elastic aluminum plate is used to examine the contact nonlinearity between the transducers and the plate. The trends observed in the experimental observations matched the numerical model predictions. Monitoring damage growth in topographical structures – formed by inserting different materials in a matrix material is also investigated. In addition to the SPC-I technique an emerging acoustic parameter – “geometric phase change” based on the topological acoustics is also adopted for sensing damage growth in the topographical structures. The performance of SPC-I and topological acoustic sensing techniques as well as the Spectral Amplitude Difference (SAD) parameter for sensing the damage growth in topographical structures are compared and discussed.